Write two MATLAB programs about this and flowing these instructions:
- Introduction and discussion of transmission lines and where they are used today 2. Discussion of the lumped element model and the forward and reverse traveling waves. 3. A discussion on open, shorted and matched line and which one is preferable and why. 4. A discussion of how one would use a shorted or open stub to achieve matching between the line and the load. 5. A brief description of the equations you are using in your code and their physical significance in the characterization of the line behavior. 6. Diagrams illustrating characteristic modes of operation of your line (behavior of Γ, �, Voltage and average power. Discuss. 7. Simulation Results (with plots and/or relevant data) for matching, Discuss 8. Conclusion 9. References 10. Copy of code used to perform calculations will be submitted separately on Gradescope. (Of course, your code should be your own or variations on the code I have provided. You are not allowed to use code or tools found on the internet.
Sample Solution